ASME B16.5 Titanium Flanges
Item: ASME B16.5 Titanium Flanges
Material: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr12, Gr23.
Standard: ASME B16.5, ANSI B16.5, ASME B16.36, JIS B2220, DIN 2501-2656, HG20592-20635.
Type: PL, SO, WN, IF, SW, TH, PJ/SE, PJ/RJ, BL, BL(S)
Size(mm): DN10-600
NPS1/2″-24″
Pressure rating: PN0.25MPa, PN0.6MPa, PN1.0MPa, PN1.6MPa, PN2.5MPa, PN4.0MPa, PN6.3MPa, PN10.0MPa,PN16.0MPa, PN25.0MPa
Pressure Classes: Class150,300,600,900,1500,2500
Sealing Surface Type: RF, FF, TG, MFM, RJ, etc.
Product Introduction
About this item:
Feature
ASME B16.5 Titanium Flanges are slip-on flanges.
The sliding flange has a lower hinge as the pipe enters the single flange before welding. It is welded internally and externally to provide sufficient strength to prevent leakage. The sliding flanges are all bore to match the slightly larger outer diameter pipe. They are superior to the welding of neck flanges, due to the lower initial cost, but the final installation cost will probably not be lower because of the added welding of neck flanges.
Applications
Due to the excellent corrosion resistance of titanium material, the titanium flanges are often used for connecting the tube ends of the petrochemical project. Also, it's useful in equipment exits and entrances to connect the two devices.
We have rich experience in forging and machining, which keeps the ASME B16.5 titanium flanges products in good quality. Moreover, to meet the specific requirements of customers, we also produce titanium flange according to customer drawings.
|
Product |
Titanium and titanium alloy flanges |
|
|
Material |
GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12, Gr23.. |
|
|
Type |
PL, SO, WN, IF, SW, Th, PJ/SE, PJ/RJ, BL, BL(S) |
|
|
Specification |
Size |
DN10-600 NPS1/2"-24" |
|
Pressure rating |
PN0.25MPa, PN0.6MPa, PN1.0MPa, PN1.6MPa, PN2.5MPa, PN4.0MPa, PN6.3MPa, PN10.0MPa, PN16.0MPa, PN25.0MPa |
|
|
Class150,300,600,900,1500,2500 |
||
|
Sealing surface type |
RF, FF, TG, MFM, RJ, etc. |
|
|
Standards |
ASME B16.5, ANSI B16.5, ASME B16.36, JIS B2220, DIN 2501-2656, HG20592-20635, etc. |
|
|
Applications |
Chemical, Petroleum, Machinery, Industry, etc. |
|
Industry and Applications
Titanium has a low density, so it is ideal where weight may be of concern. Medical and aerospace are two pillar industries of titanium alloy.
The strength and corrosion resistance of grade 2 titanium also make it very suitable for marine, chemical processing, and desalination industries. Typical applications of grade 2 titanium include oil and gas components, reaction and pressure vessels, piping or piping systems, heat exchangers, linings, flue gas desulfurization systems, and many other industrial components. Continuous operating temperatures up to 800 ° F, with occasional intermittent operation at 1000 ° F.
Corrosion resistance
The C.P. grade corrosion resistance of titanium comes from the strong and stable protective oxide film formed in the presence of oxygen.
This film enables commercial pure titanium grades to resist most oxidation, neutral and inhibitory reduction, as well as mild reduction environments. Grade 2 has excellent corrosion resistance in seawater and marine atmosphere. The corrosion resistance of the four C.P. grades is similar, but the mechanical properties vary with the content of oxygen and iron. Grade 2 titanium is corrosion-resistant by moist chlorides and metal chlorides, chlorite and hypochlorite solutions, nitric and chromic acids, organic acids, and many industrial gas applications.
Packing Method
Standard packing: plastic film or bubble paper wrapped on the product's surface, protect ends with caps, pack with wooden case or load on fumigation plywood pallet.
Custom-made requests are available.
Hot Tags: asme b16.5 titanium flanges, China asme b16.5 titanium flanges manufacturers, suppliers, factory, titanium an fittings, titanium forgings, titanium raw material, 6al 4v titanium round bar, titanium 3 inch tubing, titanium alloy plates
You Might Also Like
Send Inquiry
