Gr2 Titanium Eccentric Reducer
Item: Titanium Eccentric Reducer
Standards: ASTM B363, ASME B16.9, ASME SB363, ANSI B16.9
Material: Gr1/Gr2/Gr7/Gr9/Gr12
Specification: Φ500 x Φ200 x 1mm
MOQ: 1pcs
Payment: T/T at sight, L/C.
Product Introduction
Description
Gr2 titanium eccentric reducer is used in the situation of changing the direction of the pipelines. Titanium material has good corrosion resistance have been widely used in chemical, petroleum, petrochemical, vacuum salt production, preparation, marine engineering, power plants, and harsh environment pipelines.
Titanium Pipe Reducers
Titanium pipe reducers are produced by forging and welding, and small-diameter ones are formed by spinning from seamless pipes.
The diameter reduction of the reducer is to put the large end diameter of the pipe into the mold and shrink the pipe diameter by pressing.
Diameter expansion is to expand the diameter of the small end of the pipe through a mold.
Stamping and punching.
In addition to using tubes for diameter reduction or expansion, titanium reducers can also be made by stamping and stretching.
Titanium reducers are mainly used in the following situations:
When the flow quantity of the fluid changes in the pipeline (such as increasing or decreasing), but the flow rate is required to remain the same, to achieve this purpose titanium reducers are used.
At the inlet of the pump, to prevent cavitation, it is necessary to use a reducer.
At the joints with instruments, such as flowmeters and regulating valves, to connect with the instruments, reducers are also required.
Specifications
|
Item |
Titanium eccentric reducer |
|
Grade |
Gr1/Gr2/Gr7/Gr9/Gr12 |
|
Technique |
Forged, Welded, Rolled |
|
Standard |
ASTM B363, ASME B16.9, ASME SB363, ANSI B16.9 |
|
Inspection |
X-ray detection |
|
Delivery State |
Annealed |
|
Surface |
Sandblasted, Polishing, Pickling |
|
Product Marking |
By laser marking |
|
Application |
Petroleum, Chemical Industry, Chloralkaline, Metallurgy, Carbonization, Refrigeration, Light Industry, Salt Industry, Electric Power, etc. |
Chemical composition of titanium eccentric reducer
|
Material |
N |
C |
H |
Fe |
O |
Al |
V |
Pd |
Mo |
Ni |
Ti |
|
Gr1 |
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
/ |
/ |
/ |
/ |
/ |
Balance |
|
Gr2 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
/ |
/ |
Balance |
|
Gr7 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
0.12- 0.25 |
/ |
/ |
Balance |
|
Gr9 |
0.03 |
0.08 |
0.015 |
0.25 |
0.15 |
2.5- 3.5 |
2.0- 3.0 |
/ |
/ |
/ |
Balance |
|
Gr12 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
0.2- 0.4 |
0.6- 0.9 |
Balance |
Applications of Titanium Reducers：
Titanium has the advantages of high strength, lightweight, good heat transfer performance, corrosion resistance, etc., and has been widely used in the chemical industry. These characteristics of titanium make it a better choice for chemical engineering. Titanium has been widely used in the chemical industry. Titanium pipe fittings can Reduce production costs by reducing maintenance, reducing downtime, increasing product quality, and increasing pipeline life.
Gr2 Titanium eccentric reducer are widely used in corrosive media due to their good corrosion resistance, such as ion membrane caustic soda, propylene oxide, etc. Titanium pipe fittings have been widely used in chemical, petroleum, petrochemical, vacuum salt production, preparation, marine engineering, power, equipment, and pipelines. Titanium pipe fittings are also used in formic acid, methane chloride, and other projects to solve pipeline corrosion problems.
Hot Tags: gr2 titanium eccentric reducer, China gr2 titanium eccentric reducer manufacturers, suppliers, factory
You Might Also Like
Send Inquiry
