High Purity Titanium Ingot

The material Ti6Al4V is one of the most widely used titanium alloys. The grade 3.7164 is specified according to AMS standards and designed for aerospace applications. Through standards such as AMS 4928 for forged material, bar material, and profiles as well as wires or AMS 4911 for strips and sheets, the material 3.7164 meets the high-quality standards of the aerospace industry.

 

High purity titanium ingot designed for industrial applications is standardized to ASTM B248 for flat material or ASTM B348 for round material and then becomes material number 3.7165. 3.7165 is also used in medical technology, particularly for surgical implants, 3.7165 is also used. For this area, the ASTM F136 standard specifies strict requirements for the chemical composition and mechanical values. As a result, Ti6Al4V is given the suffix "ELI" (Extra Low Interstitial) and the designation Grade 23 instead of Grade 5.

 

Ingots made from the sturdiest metal Titanium have multiple advantages. They do not rust even if they are stored outdoors. Also, titanium has a lower density than steel which makes it easier to transport. Moreover, due to Titanium ingots are sturdier than steel ones, they make better products.

 

Titanium Grade 5 is the most widely used titanium alloy. It is characterized by good hot formability and weldability. It is also resistant to salt water, marine atmosphere and corrosive media temperatures below 300 ° C. Grade 5 titanium alloy is most likely to be accepted by the human body (medical industry).

 

 

Material	Titanium Gr 5
Material Symbol	R56400
Trademark	Ti6Al4V

 

Main fields of application of Titanium Gr 5

 

Titanium Grade 5 is the most used alloy in many areas. Thus, for example in:

 

Aerospace and Aircraft

sports equipment

Medical industry

chemical industry

 

 

Ti	Al	V	H
%	%	%	max %
88.74-91.0	5.5-6.75	3.5-4.5	0.015

 

 

Temperature Range	High-temperature range/Material for wet corrosion
Density	4.43 g/cm³
Melting Range	1650°C
ISO-V notch impact toughness at -59°C	across < J/cm²
Ultimate Tensile Strength	135 KSI (950 MPa)
Yield Strength (0.2% offset)	125 KSI (880 MPa)
Elongation	15%
Hardness	HRC 34

 

Since we not only sell but also produce semi-finished products from Titanium we can produce titanium ingots as semi-products complying with each customer's wishes and requirements. We can guarantee that our semi-finished products will always be of premium quality and long-lasting.

 

High purity titanium ingot was originally developed for aviation and aerospace applications. Due to the combination of excellent strength, low weight, and excellent corrosion resistance, this alloy is now used in numerous applications, making it one of the most widely used titanium alloys. It is also applied in sports, marine technology, and medical technology. Another advantage of Ti-6Al4V Grade 5 when annealed is that it is suitable for use at temperatures up to 400°C and is easy to forge, form, and weld.

 

Areas of application for Ti-6AL4V | WL 3.7164

 

Aircraft engine intake housings, compressor blades, disks, hubs and spacers, airframe components, offshore oil and gas equipment, power generation industry, motorsport/automotive components, and consumer products.

 

Characteristics Ti-6AL4V | WL 3.7164

 

Chemical composition - limits in %

 

Ti	Rest
Al	5,50 - 6,75
V	3,50 - 4,50
Fe	max. 0,30
O	max. 0,20

 

Physical constants and thermal properties

 

Density	4,42 g/cm³
Melting point	1648 °C
Beta transus temperature	980 ± 4°C
Thermal conductivity at 20°C	6,7 W/ m°C

 

Mechanical properties (room temperature)

 

Yield strength
0,30 - 6,00mm Thickness	min. 870 MPa
6,00 - 100,00mm Thickness	min. 830 MPa
Tensile strength
0,30 - 6,00mm Thickness	min. 920 MPa
6,00 - 100,00mm Thickness	min. 900 MPa
Elongation	min. 10%

Hot Tags: high purity titanium ingot, China high purity titanium ingot manufacturers, suppliers, factory, ti 6al 4v, titanium metal alloy, oval titanium tubing, titanium socket cap screws, titanium screws, titanium carbide