Titanium Forged Disc

The titanium forged disc is subjected to pressure to produce a desired shape or a suitable total force by plastic deformation. This force is usually achieved by using a hammer or pressure. Titanium forged discs need to be identical to each other without any voids, extra space, inclusions, or other defects.

 

West-Ti also provides titanium alloy square block customized service.

 

Why Choose a titanium disk or block from West-Ti?

 

On-time delivery

 

Competitive prices.

 

Best after-sale service

 

Technique: Forging

 

Size: Dia: 4-200 mm

 

Materials and standards of Titanium Forged Disc that we can do:

 

●Gr1 Unalloyed titanium

●Gr2 Unalloyed titanium

●Gr3 Unalloyed titanium

●Gr4 Unalloyed titanium

●Gr5 Titanium alloy (6 % aluminum, 4 % vanadium)

●Gr7 Unalloyed titanium plus 0.12 to 0.25 % palladium

●Gr9 Titanium alloy (3 % aluminum, 2.5 % vanadium)

●Gr12 Titanium alloy (0.3 % molybdenum,0.8%nickel)

●Gr19 Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)

●Gr23 Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI)

 

Titanium forged disc has the characteristics of low density, high strength, and strong corrosion resistance.

 

Good thermal conductivity,

 

Biological features, plasticity, etc.

 

Titanium and titanium alloy discs and rings are mainly applied in the petrochemical industry, metallurgical Industry, and medical device industry.

 

Surface Treatment: Lathing and chamfering

 

Surface Quality: The surface roughness (Ra) of two end faces should not be more than 3.2lμm (which is subject to requirements of ultrasonic inspection). The surface roughness (Ra) of external and internal side faces should not be more than 12.5μm (and Ra should not be more than 3.2μm when the external circular face accepts ultrasonic flaw detection). The chamfer's radius is between 5～15mm. The product surface should not have visible flaws, such as cracks, backfins, and double skin. Local flaws on the surface are allowed to be removed by polishing and grinding. The depth of removal should not be more than the corresponding dimensional tolerance, and the maximum acceptable dimension should be ensured. The ratio of depth of removal to width of removal should not be more than 1:6 at end faces, and should not be more than 1:10 at external and internal side faces. The external side face should be polished and ground along its axial.

 

Physical Properties: Better elongation and strength. No deformation after cold bending. No cracks after flattening and flaring. Wires with a diameter of over 3mm have no discontinuity, pores, laminations, cracks, or metal or non-metal impurities.

 

We adopt an automatic cleaning machine and rotary brush to clean the surface and then rinse the surface under high pressure. Products are clean and dust-free and have a longer acid-resistant service life.

 

Test: test on mechanical properties, test on chemical ingredients, and ultrasonic detection.

 

Quality control during the production process：

We use domestic first-class forging and pressing equipment and production processes controlled by high-accuracy tolerance, so the products' dimensional tolerance is controlled at a high level. Initial, in-process, and final inspections are carried out to ensure product quality.

 

0A-grade, 0-grade, and 1-grade sponge titanium is produced by the largest sponge titanium manufacturer in China. Test on physical and chemical properties can ensure that each batch of goods meets industrial standards. Each titanium disc and each titanium ring are tested and inspected within allowable dimensional tolerance.

 

If the above product specifications don't meet your requirements, we can also provide a third-party inspection.

 

State supplied: Annealed state (M), hot processing state (R), and cold processing state (Y) (annealing and ultrasonic flaw detection).

 

Packing: Packed in the carton or wooden case.

Hot Tags: titanium forged disc, China titanium forged disc manufacturers, suppliers, factory, niti wire, titanium filler rod, titanium material, titanium bolt kits for motorcycles, niobium titanium alloy, titanium and titanium alloy