Titanium Forging
Source: https://alloysintl.com/titanium-applications/titanium-forging/ (revised)
Metal's high demand is primarily due to the remarkable strength-to-density ratio of forged titanium alloys and the metal's significant anti-corrosive properties. These features result in a durable and reliable material that can work well on land, in the air, and even under the sea-all of which illustrate the versatility of titanium alloys.
The Titanium Forging Process, includes:
Open Die Forging – Blank titanium material is deformed and pressed into shape in the cavity between two molds. These molds do not completely encapsulate the material but instead provide a narrow gap through which excess material can flow out. When in the cavity, the titanium is repeatedly stamped until the desired shape is achieved.
Closed Die Forging – Also known as impression die forging, this method uses compression under high pressure to shape a heated titanium blank. The blank is covered either in full or in part by the dies, which move toward each other from top to bottom to achieve the required form.
Free Forging – Small and/or simple orders may be accomplished with free forging, a titanium forging method that is performed between two flat dies without an inner cavity. It is a relatively inexpensive and flexible method, but due to high labor requirements, it's not the most common way to forge large amounts of titanium metal.
Isothermal Forging – A process by which the starting material and the die are heated to an equal and highly controlled temperature to achieve high deformation rates with minimal pressure.
Other types of titanium alloy forging, such as multi-direction die forging, extrusion die forging, partial die forging, and rolled ring forging, rely on similarly unique alignments of heat, pressure, and die used to achieve desired shapes.
Advantages of forging products
High Strength
Corrosion Resistance
Heat Resistance
Biocompatibility
Weldability
Additionally, depending on the specific application requirements. When looking for titanium forging companies, different grades of titanium alloys that are used in the forging process, ensure that the company you are interested in working with can forge titanium to the specifications you need.
Some of the most common grades include:
Gr5: Ti6al-4v: One of the most widely used titanium alloys in forging, 6-4 titanium is particularly popular in aerospace components.
Ti6-2-4-2 (UNS R54620): Prized for its excellent creep resistance and strength at elevated temperatures, 6-2-4-2 titanium is utilized in components where high heat and stress are present.
Ti6-2-4-6 (UNS R56260): Similar to 6-2-4-2 titanium, but with improved toughness and ductility.
Gr9 (Ti 3-2.5) UNS R56320: Known for exceptional weldability and corrosion resistance, 3-2.5 alloy is often used in the medical industry for implants.
Effects of The Forging Temperature
Can titanium alloy be forged at any temperature? Technically, yes; however, the temperature used must be correct for the process and part.
Hot forging is more common than cold forging, though the latter can be cheaper and more environmentally friendly. Notably, lower temperatures (below 1650 degrees Fahrenheit) are only suitable for non-alloyed titanium, while higher temperatures are a requirement for alloyed titanium.
It's not just the temperature of the titanium itself that is essential during forging. The dies' temperature must also be controlled since excessive heat loss or variations in heat will lead to defective parts.
The importance of temperature in the titanium forging process is primarily related to the metal's structural elements at various heat levels. By forging with the correct heat levels of starting material and dies, the forger can create a more robust and reliable end product-one that is structurally suitable for the job at hand.
Want to know more? Please contact us for more information with additional questions, or for support sourcing the titanium parts that you require for your business.
